一鍵購買100美元商品
每月優惠與折扣
統一運費 199 元
一鍵購買100美元商品
每月優惠與折扣
統一運費 199 元
一鍵購買100美元商品
每月優惠與折扣
統一運費 199 元
一鍵購買100美元商品
每月優惠與折扣
統一運費 199 元
一鍵購買100美元商品
每月優惠與折扣
統一運費 199 元
一鍵購買100美元商品
每月優惠與折扣
統一運費 199 元
抽屜選單
-
電子產品與配件
-
電腦、辦公室及配件
-
家居與園藝
-
美容與健康
-
寵物用品
-
安全性
-
汽車
-
時尚
-
工業與科學
-
運動與娛樂
-
玩具、兒童與嬰兒用品
特價中
您的專屬黑色星期五優惠!
享受全館額外85折優惠 — 專屬於您。
MAXIMIZEBF
您的專屬黑色星期五優惠!
選擇您的地點
-
進化總部
免費
通常24小時內可取貨
美國紐約州紐約市第九大道75號,郵遞區號10011
📞 (+1) 212-456-7890
🕐 週一至週五:上午8:30 – 晚上10:30
週六:上午8:30 – 晚上10:30
週日:休息 -
市中心分行
-
皇后區服務中心
免費
隔日出貨
美國紐約州埃爾姆赫斯特皇后大道89-10號,郵遞區號11373
📞 (+1) 917-555-3344
🕐 週一至週五:上午9點至晚上8點
週六:上午10點至下午6點
週日:休息
副標題
產品比較
描述您的產品比較表格
|
__ __ |
|
|---|---|
| 描述 |
描述 - __ |
| 評分 |
評分 - __ |
| 供應商 |
供應商 - __ |
| 顏色 |
顏色 - __ |
|
|
比較產品 ( / )
13338 件商品
13338 件商品
排序方式:
- 精選
- 最相關
- 暢銷度
- 依字母順序 (由 A 到 Z)
- 依字母順序 (由 Z 到 A)
- 價格 (從低到高)
- 價格 (從高到低)
- 日期 (從舊到新)
- 日期 (從新到舊)
從 HK$252.00 HKD 起
1. Frequency: 50 Hz
2. Rated voltage: 12V/24V/220V
3. Rated power: 80W/180W
4. Capacity: 2.0L
5. Cooking time: 60 minutes at 24V / 30 minutes at 12V
6. Control mode: microcomputer type
7. Power failure memory function: in the event of a power failure, no reset is required within 30 minutes.
8. 2-liter capacity, suitable for 2 to 4 people, holds 6 bowls of rice.
9. 5-layer composite lining uses a concentrated energy design for even heating, ensuring sweet and delicious rice without overcooking.
10. Removable and washable liner for portability.
11. Available in four versions: a 12V version designed for cars, a 24V version designed for trucks, and a 12V to 24V universal version suitable for both home and car use.
12. Dimensions: 20x20cm
13. Note: do not use hot water to cook rice, as this will affect the thermostat. Do not start cooking one pot of rice immediately after the next one is finished. You will need to wait more than 15 minutes before restarting.
| Package Weight |
|
Receives in 7 days.
HK$212.00 HKD
1. Material: plastic
2. Plug and play, no programming or adjustments required
3. For BMW Mini Cooper - E60 - E84 - E87 - E90 3 Series 5 Series
4. Please inspect carefully to ensure this item meets your needs.
5. Please verify the part number with yours before purchasing for compatibility.
6. Note: this product may be subject to continuous updates. Due to different batches, there may be slight differences or color variations in the actual product, but this will not affect performance.
Installation guide:
1. Turn off the car
2. Remove the steering wheel cover
3. Unplug the damaged SCL cable
4. Plug the cable into the simulator
5. Turn on the car (the engine should start at this point)
| General |
|
| Package Weight |
|
Receives in 7 days.
HK$212.00 HKD
1. Material: plastic
2. Plug and play, no programming or adjustments required
3. For Mercedes-Benz W204 / W207 / W212 / W176 / W447 / W246 ESL / ELV
4. Please inspect carefully to ensure this item meets your needs.
5. Please verify the part number with yours before purchasing for compatibility.
6. Note: this product may be subject to continuous updates. Due to different batches, there may be slight differences or color variations in the actual product, but this will not affect performance.
Installation guide:
1. Turn off the car
2. Remove the steering wheel cover
3. Unplug the damaged SCL cable
4. Plug the cable into the simulator
5. Turn on the car (the engine should start at this point)
中文描述:
| General |
|
| Package Weight |
|
Receives in 7 days.
HK$195.00 HKD
1. Material: plastic
2. Plug and play, no programming or adjustments required
3. For Mercedes-Benz ESL/ELV W204, W207, and W212
4. Please inspect carefully to ensure this item meets your needs.
5. Please verify the part number with yours before purchasing for compatibility.
6. Note: this product may be subject to continuous updates. Due to different batches, there may be slight differences or color variations in the actual product, but this will not affect performance.
Installation guide:
1. Turn off the car
2. Remove the steering wheel cover
3. Unplug the damaged SCL cable
4. Plug the cable into the simulator
5. Turn on the car (the engine should start at this point)
| General |
|
| Package Weight |
|
Receives in 7 days.
從 HK$125.00 HKD 起
1. Operating voltage: 3.7V
2. Operating temperature: -20°C to 70°C
3. Waterproof rating: IPX7
4. Pressure range: 0-5 Bar
5. Transmitting frequency: 433.92 MHz
6. Transmitting power: 10dBm
7. Charging voltage: DC 5.1V
8. Suitable for vehicles with tire pressures within the 5 Bar range
9. IPX7 waterproof, withstands 30 minutes of submersion without any issues. It can operate smoothly even in rain, splashing water, navigating puddles, and flooded parking spaces.
10. The main body is made of environmentally friendly, precision-engineered aviation aluminum, offering high strength and durability, fast heat dissipation, and a secure, stable design. Built into the tire, it provides sharper sensing and more accurate detection. The aluminum alloy valve stem features a strong, durable, and age-resistant seal for enhanced performance.
12. Intelligent power on/off, no manual operation required, saving energy and worry.
13. The pressure (bar) and temperature (degrees Celsius) of all four tires are simultaneously sensed and transmitted, clearly displayed on the display, allowing you to monitor all four wheels at all times.
14. The tall, reusable solar panel allows for easy placement without the need for additional charging during normal driving. It also features an Android USB charging port, ensuring seamless power after initial installation and charging even in the absence of sunlight.
15. Dimensions: 93.8 x 88.5 x 28.5 mm
16. External sensor package includes: 1 host + 4 sensors + 1 charging cable + 4 anti-theft nuts + 1 wrench + instruction manual + 1 double-sided tape + gift box
17. Internal sensor package includes: 1 host + 4 sensors + 1 charging cable + 4 alloy valve stems + 4 screws + instruction manual + 1 double-sided tape + gift box
Note:
1. The sensor and receiver are factory-paired. Re-pairing is required only when changing sensors or receivers.
2. When the display detects a vibration signal while in sleep mode, it automatically powers on and displays tire pressure and temperature data. It automatically goes into sleep mode after parking for more than 10 minutes.
3. Press the "-" key for 3 seconds to power the device on and off.
4. When the tire is running at a speed of 20 km/h or above, the sensor pressure and temperature data are automatically updated.
5. Alarm Description
- When tire pressure exceeds the set safety range or there is a leak, the pressure value and alarm symbol for the corresponding tire on the display flash, and the buzzer emits a series of "bi.bi.bi" sounds. Pressing any key will silence the alarm, but the fault icon will remain displayed.
- When tire temperature exceeds the set safety range, the temperature value and alarm symbol for the corresponding tire on the display flash, and the buzzer emits a series of "bi.bi.bi" sounds. Pressing any key will silence the alarm, but the fault icon will remain displayed.
- When the tire sensor battery is low, the corresponding tire symbol and transmitter low battery symbol on the display flash, and the buzzer emits a series of "bi.bi.bi" sounds. Pressing any key will silence the alarm, but the fault icon will remain displayed.
| Package Weight |
|
Receives in 7 days.
HK$108.00 HKD
1. Housing material: ABS + PC
2. Display voltage: DC12-24V
3. Output: (30W + 20W) Max 50W
4. Retractable length: 800mm
- TYPE-C: PD (5V/3A, 9V/3A, 12V/2.5A) (Max 30W)
- 8-pin: 5V/2.4A
- USB: 5V/2.4A
- TYPE-C female connector: 5V/3A
5. Includes a built-in cable for quick charging. Automatically retracts with a single pull, eliminating clutter in your car.
6. Fast-charges multiple devices simultaneously, supporting multi-protocol flash charging and multi-directional transmission.
7. Adjustable head for convenient use in different device positions.
8. High-quality smart chip maximizes output power and provides bidirectional protection for both your phone and the charging device.
9. Thickened metal spring securely locks the cigarette lighter port, preventing it from falling off even on bumpy roads.
10. Wide voltage range of 12-24V, compatible with mainstream sedans, SUVs, vans, and trucks.
11. Compatible with all devices supporting PD/QC/SCP/FCP/AFC/PSS fast charging protocols.
12. Dimensions: 136x56x34.2mm
| Package Weight |
|
Receives in 7 days.
HK$30.00 HKD
1. Material: silicone
2. High-quality construction, soft and durable
3. Handle for easy removal and anti-slip design
4. Eco-friendly and heat-resistant, suitable for both car and home
5. Washable, durable, and suitable for hot or cold drinks
6. Weight: 20g
7. Dimensions: 3.23 x 0.6 inches
| Package Weight |
|
Receives in 7 days.
HK$193.00 HKD
1. Input voltage: 10-15V
2. Output power: 200W
3. Output voltage: AC220V
4. Cable length: 75cm
5. USB output: QC3.0 (5V3A, 9V2A, 12V1.5A) x2 / 5V2.4A x2
6. Built-in high-speed fan, intelligent temperature control chip, and dual temperature monitoring points monitor device temperature in real time, maintaining a low temperature at all times
7. Nylon and fiber-reinforced plug ensures stability and wear resistance, is fireproof and heat-resistant, and features pure copper contacts for durability and excellent electrical conductivity.
8. Refined pure oxygen-free copper core provides excellent electrical conductivity, stable voltage, low heat generation, lower resistance, and energy efficiency.
9. High-quality copper bar integrated socket adapts to various plug types, offering a strong fit and long-lasting plug-in stability.
10. Suitable for 12V/24V vehicles such as sedans, SUVs, and off-road vehicles.
11. Using QC 3.0 fast charging technology, quickly recharge your devices and stay connected anytime, anywhere.
12. Fully compatible with all protocols, 200W power delivery to six ports simultaneously meets all your needs.
13. Suitable for laptops (up to 100W), tablets (up to 100W), mobile phones (up to 100W), cameras, drones, and small fans; not suitable for rice cookers, kettles, heaters, hair dryers, microwave ovens, or induction cookers.
14. Smart digital display for real-time battery voltage monitoring.
15. Dimensions: 167x87x46mm
| Package Weight |
|
Receives in 7 days.
HK$1,087.00 HKD
1. For New Holland, Kobelco, CASE, Steyr, Flexicoil, FK, O&K, New Holland Construction, and New Holland Agriculture brands.
2. The New Holland EST interface connects to SN.380002884.
3. This interface is used in diagnostic mode and for New Holland vehicles equipped with Iveco engines and is easily accessible via EST.
4. We are using a K-LINE model test adapter (a computer is not included).
5. Electronic Service Tool (EST)—Used by dealership technicians to connect to machines with a Controller Area Network (CAN) bus, which is part of the electronic system architecture.
6. Supported Languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch.
7. Note: When installing the V8.6 software, please adjust your laptops time to 2018. Year
8. This service tool allows you to:
- Check parameter status;
- Check parameter status;
- Find faults;
- Perform diagnostic tests;
- Generate electronic control unit (ECU) parameters;
- Monitor active status and logged diagnostic information;
- View diagnostic procedures and charts;
- Troubleshoot faults;
- Use auxiliary databases;
- Run range diagnostics;
Kit includes:
1. USB flash drive for CNH-EST V8.6 software
2. Dearborn protocol adapter for CNH-EST interface
3. USB data cable
4. 9-pin German data cable
| Package Weight |
|
Receives in 7 days.
從 HK$105.00 HKD 起
1. Helps you diagnose and clean fuel injectors, easily identifying common faults such as stuck, clogged, leaking, or burned fuel injectors.
2. Features two pulse output temperatures (two pairs of test leads) for simultaneous testing of two fuel injectors for comparison.
3. This fuel injector tester kit features an LCD display and eight pulse modes, including four pulse signal output modes and two output voltage levels: short/medium/long/continuous pulse modes, and high/low (12V/5V) power drive modes.
4. Helps you identify good and bad injectors with the engine off.
5. Select any mode as needed, and its mode lock feature ensures consistent testing conditions.
6. Compatible with 12V injectors from nearly all vehicle models, suitable for both EFI and GDI injectors.
7. The power cord is up to 40 inches/100 cm long, and the test leads are 20 inches long, making it easy to connect and use.
8. The wires are made of high-quality silicone for improved high and low temperature resistance.
9. Powered by a 12V battery or an external DC 12V (minimum 1.5A recommended) power adapter.
10. Operates with the engine off and works with any fuel pressure tester (Note: gasoline vehicles only, not diesel engines).
11. Features power input reverse connection protection and output short-circuit protection. If the fuel injector is damaged or the pulse output terminal is short-circuited, the fuel injector cleaning tools power indicator will flash.
| Package Weight |
|
Receives in 7 days.
HK$14.00 HKD
1. Material: pure copper
2. Compatible vehicles: agricultural vehicles/loaders/rollers
3. Deep, clean threads, evenly distributed force, and less prone to slippage
4. Smooth, burr-free surface, durable and sturdy
5. Convenient to use, easy to install and tighten by hand
6. Brass is corrosion-resistant, has strong oxidation resistance, stable performance, and resists deformation
7. Weight: 42g
| Package Weight |
|
Receives in 7 days.
HK$9.00 HKD
1. Material: stainless steel
2. Application: compatible with American standard valves on cars, motorcycles, electric vehicles, bicycles, and more
3. One-piece molding, compact and practical
4. Key ring design on the end of the wrench can be used as a keychain
5. Length: 51.8mm
6. Weight: 24g
Valve core wrench instructions:
1. Remove the valve cap and carefully insert the valve core wrench into the Schrader valve.
2. Align the valve wrench with the valve core and turn counterclockwise to remove the valve core (clockwise tightens it).
| Package Weight |
|
Receives in 7 days.
HK$152.00 HKD
1. Corded: 3.8m
2. Suction power: 9000PA
3. Water tank capacity: 800ml
4. Power supply: cigarette lighter
5. LED lIght: nowhere for dust to Hide
6. Comfortable, ergonomic handle for long-term use without fatigue
7. Easy-to-remove dust collection bin, washable HEPA filter for easy cleaning and reuse
8. Dimensions: 39.5 x 9.5 x 13.2cm
9. Weight: 750g
| Package Weight |
|
Receives in 7 days.
HK$135.00 HKD
1. Material: ABS + washable HEPA and sponge dual-Layer filter
2. Suction power: brushed motor 7500PA
3. Power: 70W
4. Speed: 36,800 rpm
5. Battery capacity: 4000mAh
6. Charging method: USB-C universal port
7. Dust bin capacity: 500ml
8. Large-capacity battery for long-lasting battery life. Faster charging, longer use, and no need for wires.
9. Multiple accessories and 4 modes for 360 different scenarios, ensuring even the most thorough vacuuming.
10. Light-activated dust detection reveals hidden dust.
11. Comfortable, ergonomically designed handle for long-lasting use.
12. The built-in AI intelligent variable frequency chip maintains stronger suction, longer battery life, and more stable temperature. It automatically increases suction power for stubborn objects, making vacuuming even smarter.
13. The dust bin is easily removable, and the washable HEPA filter is easily reusable for environmental protection.
14. Product dimensions: 295 x 90 x 78mm
15. Product weight: 555g
16. Product accessories: main unit x1, 2-in-1 nozzle x1, wide brush nozzle x1, small cleaning brush x1, USB-C charging cable x1, instruction manual x1
| Package Weight |
|
Receives in 7 days.
HK$39.00 HKD
1. Compatible Models:
- For Nissan Tiida 2011-2020
- For Nissan Altima 2013-2020
- For Nissan Sylphy 2012-2020
- For Nissan X-Trail 2014-2020
- For Nissan Qashqai J11 2016-2020
- For Nissan Sentra Leaf Juke Rogue
2. OE: 25411-1KL5A
3. Made of ABS material for greater stability and reliability
4. Original equipment manufacturers standard for a perfect fit
5. Suitable for replacing damaged or worn car switches, improving button sensitivity, and replacing worn or peeling switch buttons
6. Easy installation: Simply remove the old switch and reinstall without modification.
7. Long lifespan, lasting performance, and comfortable feel.
8. Warm Tip: Before purchasing, please inspect your old part against the image and check its OEM part number to ensure compatibility.
| General |
|
| Package Weight |
|
Receives in 7 days.
HK$462.00 HKD
1. Hardware version: V2.21.21
2. New: support for Toyota J2534 protocol (depending on the software used by the buyer)
3. Support for 67 Modules open the protocol: Activate licenses 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33, 34, 35, 36, 38, 40, 42, 43, 45, 46, 47, 48, 50, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74. These 67 modules in total support thousands of car brands and provide ECU and transmission read/write capabilities, powertrain upgrade tools, and ECU cloning read/write capabilities.
4. SM2 PRO J2534 VCI Serial number: A78370, unlike other products on the market.
5. No registration or activation required, ready for immediate use. We prioritize privacy protection.
6. Even if you mistakenly update your device, you wont be locked out; simply restore to the correct driver version.
7. Added 200 new Bosch MED/EDC17 protocol read/write functions without opening the cover.
SM2 PRO J2534 VCI Functions:
1. Read and write ECU data
2. ECU cloning
3. ECU parameter adjustment
4. ECU maintenance
5. Chip debugging
6. Read ECU maps
7. Verification and calibration
8. Stage 1-3 transmission tuning, including LC, SportDisplay, anti-collision lights off, AdBlue off, DPF off, DTC off, Vmax control, and swirl off.
9. Read flash and EP files.
10. Powertrain tuning.
11. Supports online updates.
12. VR file provision.
13. Includes pins
14. Service Desk and Tuner Account
15. OBD2 Reading
16. Data can be read without disassembly or overwriting, significantly reducing the risk of ECU damage. Supports desktop mode.
17. Open-lid data reading and boot mode
Supported programs:
1. For Chrysler flash application
2. For GM gds2 / SPS - Ford FDRs, Forscan
3. For Hino DX2
4. For Honda HDS
5. For Land Rover Jaguar SDD
6. For Nissan consult 3+ - ODIS
7. For Renault clip
8. For Toyota Lexus Techstream
9. For Volvo Vida - Mercedes-Benz xentry / DasPass thru
10. For Cummins insite
11. For Cummins calterm ll
12. For Caterpillar et - JCB service master4
13. For Volvo premium tech tool
14. For WABCO Toolbox
15. For Eaton air conditioning system diagnostic software
16. For Detroit DDD
17. For Allison transmission diagnostic software
18. For Noregon JPRO truck diagnostic software
19. Other original software
20. Does not support CAN FD
| Package Weight |
|
Receives in 7 days.
HK$63.00 HKD
1. Purpose: receiver is used to locate short-circuit issues in equipment.
2. Detection system: vehicle-mounted route-finding receiver locates line breaks.
3. Easily identifies the desired cable from a large number of cables.
4. Performs continuity tests on cable integrity.
5. Transmitter is equipped with an RJ11 connector and alligator clips.
6. Features a low-voltage alarm for added safety.
7. Powered by a 9V battery (not included).
8. Easy to operate and compact and portable.
| Package Weight |
|
Receives in 7 days.
HK$13.00 HKD
1. Material: alloy
2. Compatible with M6/M8/M10/M12/M14 grease nozzles
3. Extended oil outlet with a small diameter for faster and less labor-intensive grease filling
4. Press the double handles to extend the locking tab into the grease nozzle. The six-petal locking tab design provides a tight, leak-proof lock
5. Applications: excavators/harvesters/bulldozers/ships, and various automotive parts
6. Thickened handles for durability and ease of application
7. Thickened spring for high-pressure, secure grip
8. Dimensions: 88.8 x 41 mm
9. Note: This is the grease nozzle only, not the tube
| Package Weight |
|
Receives in 7 days.
HK$49.00 HKD
1. Material: stainless steel
2. Rubber-coated handle for a comfortable grip
3. Durable construction effectively prevents scratches and damage to the interior
4. Suitable for various car modifications and repairs
5. Easily removes trim, trim, door panels, and dashboards
6. Weight: 616g
Package includes:
- Extended steel pry x 1
- Widened pry plate x 1
- Medium steel pry x 1
- U-shaped steel pry x 1
- Floor mat pry plate x 1
- Small steel pry x 1
- Large pry plate x 1
| Package Weight |
|
Receives in 7 days.
HK$31.00 HKD
1. Material: plastic/Alloy
2. Suitable for: cars/bicycles/motorcycles
3. Highly sensitive tire pressure gauge for more accurate readings
4. Quick-connect, universal valve connector for easier use
5. Comfortable, non-slip handle for a comfortable grip and easy, hand-friendly use
6. Dual-use barbed rod for inflation, can be used from both sides, with a built-in leak-proof seal
7. Dimensions: 298mm in length, tire pressure gauge diameter 40mm
8. Weight: 213g
| Package Weight |
|
Receives in 7 days.