1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.
7. Durable. With good performance and high quality, it can work for a long time.

Installation Instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.
3. Using excessive force who installing or removing the screen protector may damage the product.

1. Material: protein leather / lambskin, sponge
2. Features: good sound insulation, anti-skid, good air permeability, and full of elasticity
3. Close fit, non-destructive noise reduction of the original sound
4. Skin-friendly material, full ear design, soft and comfortable
5. High-density inert sponge, light and thin to isolate dust, no sound leakage
6. Comes with buckle design, convenient and quick installation
7. Made of protein leather / lambskin material, long-term wearing without ear pain

這是一對迷你單通道被動視頻收發器。具成本效益的點對點傳輸。可輕鬆傳輸及接收視頻訊號。適用於閉路電視攝影機、BNC、Cat5 UTP等。
1. 單通道被動視頻巴倫。
2. 搭配任何被動式收發器，最遠可達600公尺的全動態閉路電視視頻。
3. 透過UTP CAT5線纜傳輸視頻。
4. 透過UTP線纜接收及傳輸視頻訊號，無需使用電源。
5. 搭配任何主動式UTP視頻接收器，最遠可達3,000英尺（1公里）。
6. 閉路電視被動視頻巴倫支援所有視頻設備，如攝影機、監視器、DVR卡及錄影機等。
7. 無需電源。
8. 視頻收發器易於安裝，使用標準UTP線纜系統。
9. 連接器：公頭BNC及端子排。
10. 尺寸：4.5 x 1.4 x 1.5公分

1) 透過UTP CAT5網路線傳輸視頻。

2) 節省10-20%線材成本。

3) 無需電源。

4) 最大CCTV視頻移動距離：600米

1) Video transmission via UTP CAT5 cable.

2) 10-20% wire costs saved.

3) No power required.

4) Max CCTV Video Motion Distances: 600m

1. 採用優質金屬材質製成，耐用可靠
2. 適合短距離連接
3. 線纜外觀簡潔專業
4. 安裝簡便，節省時間與成本
5. 針對不同應用提供多種選擇
6. 應用範圍：天線、廣播、收音機、電信

1. Features: build temporary dining table, fold and store space.
2. Application: applicable for wall installation of kitchen, living room, bedroom and other rooms.
3. Thicken material, press and fold, strong and durable.
4. Simple and generous design, can be well integrated with the furniture decoration background, not abrupt.
5. Various sizes are available.

1. Features: build temporary dining table, fold and store space.
2. Application: applicable for wall installation of kitchen, living room, bedroom and other rooms.
3. Thicken material, press and fold, strong and durable.
4. Simple and generous design, can be well integrated with the furniture decoration background, not abrupt.
5. Various sizes are available.

1. Intelligent light control, automatic charging during the daytime and automatic lighting at night
2. IP65 waterproof
3. Suitable for decoration and lighting in residential areas, gardens and parks
4. Material: ABS + stainless steel
5. Solar panel: 2V 100MA polysilicon
6. Battery capacity: 600mAh Ni-MH battery
7. Charging time: about 8 hours direct sunlight
8. Lighting duration: about 8 hours (full charged)
9. Size: 11.5 x 11.5 x 12.6cm
10. Net Weight: 134g

1. Brand new and high quality
2. Low power consumption, save your power supply
3. High luminance
4. Easy to install, just plug & play
5. Suitable for brake light, tail light

1. Simple design, easy installation.
2. Designed to work in ground vehicles.
3. Low power consumption, saving energy and environment protection.
4. High ability of shock resistant, brighter light, low temperature.
5. Size: 51 x 22mm; weight: 40g
6. Material: ceramics

1. Simple design, easy installation.
2. Designed to work in ground vehicles.
3. Low power consumption, saving energy and environment protection.
4. High ability of shock resistant, brighter light, low temperature.

1. Power: 50 W
2. Resistance: 6 ohms
3. Voltage: DC12V
4. Easy DIY, no modification LED bulb, warning error decoder is used for turn signal light, brake lights, etc.
5. The special decoder will ensure the LED bulbs will illuminate their full potential without breakdown or flicker problems.
6. The package includes: 2 decoders.

Features
1. 100% high quality and brand new
2. Low power consumption, save your power supply
3. Easy to install, just plug & play
4. Suitable for parking lights, front or rear turn signal lights, back up reverse lights

1. 100% brand new and high quality.
2. Simple design, easy installation.
3. Major reduction, heat generation, long life.
4. Designed to work in ground vehicles.
5. Low power consumption, saving energy and environment protection.
6. High ability of shock resistant, brighter light, low temperature.

1. Brand new and high quality
2. Low power consumption, save your power supply
3. High luminance
4. Easy to install, just plug & play
5. Suitable for Reversing Light / Turn Light

Features
1. 100% high quality and brand new
2. Low power consumption, save your power supply
3. Easy to install, just plug & play
4. Suitable for parking lights, front or rear turn signal lights, back up reverse lights

1. 100% brand new and high quality.
2. Simple design, easy installation.
3. Major reduction, heat generation, long life.
4. Designed to work in ground vehicles.
5. Low power consumption, saving energy and environment protection.
6. High ability of shock resistant, brighter light, low temperature.

1. Power: 50 W.
2. Resistance: 8 Ohm.
3. Easy DIY, no modification LED bulb warning error decoder is used for fog light, daytime running lights, etc.
4. The special decoder will ensure the LED bulbs will illuminate their full potential without breakdown or flicker problems.
5. Package content: 2 x LED Decoder.

1. Simple design, easy installation.
2. Major reduction heat generation, long life.
3. Low power consumption, saving energy and environment protection.
4. High ability of shock resistant, brighter light, low temperature.
5. Material: Aluminum

1. Brand new and high quality
2. Super bright white light, easy to install
3. Long life time, low power consumption
4. New LED technology reduces power consumption.
5. Attractive slim design and adjustable bracket that fits various car models
6. The Bulbs Mostly Used on Interior light, Fog light, Door light, Driving Light, Tail Light, Turn Light, Reverse Light, Brake Light, License Plate Light, Head Light, and so on.
7. Since the nature of the item being offered might fit a large variety of different vehicle and functions, please make sure this is the correct application type of bulb.

1. Simple design, easy installation.
2. Major reduction heat generation, long life.
3. Low power consumption, saving energy and environment protection.
4. High ability of shock resistant, brighter light, low temperature.
5. Parameter:
Lamp beads: SMD-3014 42 lights
Material: Silicone
Working mode: white light always bright + red light flashing
Voltage: 12V
Power: 1.1W

1. Simple design, easy installation.
2. Designed to work in ground vehicles.
3. Low power consumption, saving energy and environment protection.
4. High ability of shock resistant, brighter light, low temperature.
5. With constant current.

Features
1. 100% high quality and brand new
2. Low power consumption, save your power supply
3. Easy to install, just plug & play
4. Suitable for parking lights, front or rear turn signal lights, back up reverse lights

1. Intelligent light control, automatic charging during the daytime and automatic lighting at night
2. IP65 waterproof
3. Suitable for decoration and lighting in residential areas, gardens and parks
4. Material: ABS + stainless steel
5. Solar panel: 2V 100MA polysilicon
6. Battery capacity: 600mAh Ni-MH battery
7. Charging time: about 8 hours direct sunlight
8. Lighting duration: about 8 hours (full charged)
9. Size: 11.5 x 11.5 x 12.6cm
10. Net Weight: 134g

1. Material: PC
2. Size: about 12x4x2 cm/piece
3. Weight: about 70g/pair
4. Voltage: DC12-24V
5. Light source: LED
6. Color temperature: 2000-4000K
7. Number of lamp beads: 8 LEDs
8. Wiring instructions: there are 3 wires, the black wire is connected to the negative pole, the yellow wire is connected to the positive pole, and the third yellow wire has a flash (2S flash when power is on)
9. Application: trucks, trailers, trucks, engineering vehicles, etc.
10. Features: equipped with screws, simple and convenient installation, waterproof and anti-fog, durable, wide applicability

1. Made of metal material, durable to use.
2. Low power consumption and high brightness.
3. Waterproof, dustproof and shockproof.
4. Easy to install, no drilling required.
5. The light diffusion high power LED products, high luminance characteristics.

1. Brand new and high quality.
2. Low power consumption and high brightness.
3. Waterproof, dustproof and shockproof.
4. Easy to install, no drilling required.
5. The light diffusion high power products, high luminance characteristics.
6. Easy and simple to install