1. Brand new and high quality
2. CRC9 male to SMA female cable
3. Length: 15cm

1. Brand new and high quality.
2. Excellent durability and mechanical strength.
3. MCX to F female cable.
4. Made of copper wire core, fast transmission, low signal attenuation.
5. Application for antennas, Wireless LAN devices, coaxial cable, Wi-Fi radios external antenna and so on.

1. Brand new and high quality.
2. Excellent durability and mechanical strength.
3. RCA female to FAKRA Z Type female cable.
4. Made of copper wire core, fast transmission, low signal attenuation.
5. Application for antennas, Wireless LAN devices, coaxial cable, Wi-Fi radios external antenna and so on.

1. Excellent durability and mechanical strength.
2. SMA female to MCX male cable.
3. Made of copper wire core, fast transmission, low signal attenuation.
4. Application for antennas, Wireless LAN devices, coaxial cable, Wi-Fi radios external antenna and so on.

1. Brand new and high quality.
2. Excellent durability and mechanical strength.
3. SMA male to MCX male cable.
4. Made of copper wire core, fast transmission, low signal attenuation.
5. Application for antennas, Wireless LAN devices, coaxial cable, Wi-Fi radios external antenna and so on.

1. Brand new and high quality
2. TS9 male to SMA female cable
3. Length: 19cm

1. Connector A: UHF male plug PL259 (screw inside & center is male pin)
2. Connector B: SMA male plug (inside screw and center is male pin)
3. Cable type: UHF-SMA RG316 Pigtail Cable
4. Impedance: 50 ohm
5. Material: Copper
6. Cable length: 15cm

1. Support 10 / 100 / 1000Mbps auto-sensing capability
2. USB-C / Type-C interface
3. Support auto MDIX(straight and cross network cable auto detection)
4. Support USB full and high speed modes with bus power capability
5. IEEE 802.3, 802.3u, 802.3ab
6. Support both full duplex and half duplex operation in fast ethernet
7. Support Jumbo packet of up to 9KB
8. Support suspend mode and remote wakeup via link up and magic packet
9. Plug and play installation

1. Material: LCD, ABS
2. Purpose: graffiti, message, drawing, etc.
3. Interface: USB
4. Battery capacity: 170mAh
5. Size: about 31.5x25x0.7 cm
6. Weight: about 410 grams

Features:
1. The strokes are concise and smooth, and the writing is clear
2. Childrens intellectual development, early education toys
3. USB interface charging, convenient and fast
4. Can be used to record and leave messages during a meeting
5. One key to clear, easy to use
6. Lightweight and easy to carry, eye protection without radiation

1. It is only 60mm after folding, takes up no extra space, is flexible and can be stored next to the wardrobe or under the bed on the sofa.
2. It is easy to carry and not bulky. Girls can easily carry it with one hand and can be used without limiting the space.
3. Use raised dot acupressure to massage your feet while soaking them to relieve foot fatigue. Enjoy the dual experience of foot bath and massage and feel the comfort brought by foot bath.
4. TPE polymer material, one-piece molding, durable
5. Mobile phone card slot design, you can watch TV shows while soaking your feet
6. Material: PP+TPR
7. Capacity: 15L
8. Dimensions: unfolded 40 x 32 x 17cm, folded 40 x 32 x 6cm

1. This High quality low profile cat 6 network cable is ideal for gigabit connections.
2. The copper cable allows for speeds of up to 1000Mbps and its low profile design allows it to be run under floors or carpets easily as the cable is just over 1.4mm in height.
3. Cat6 UTP flat network cable with moulded RJ45 ends only 1.4mm thick and 6mm wide.
4. This flat long patch cables are the most comfortable with any gasket type (in a flat, house, office),easy to suitable for the tightest spaces.
5. Support Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, high-speed data transfer.
6. Cat6 cable high speed ethernet cable used for PCs, computer servers, printers, routers, switch boxes, network media players, NAS, VoIP phones, PoE devices, and others.

1. This high-quality, thin cat 8 cable is ideal for gigabit connections
2. This long flat patch cable is best suited to any gasket type (flat, house, office) and is easily suitable for the narrowest Spaces
3. PVC material with high elasticity and environmental protection, 26AWGOFC oxygen-free copper, up to CAT8 standard, tested by test instrument
5. Outside diameter of wire: 7.0mm
6. Wire specification: 26AWG, OFC oxygen-free copper
7. Interface type: RC45
8. Bandwidth: 2000Mhz
9. Transmission rate: 40Gbps
10. Transmission distance: within 30 meters to 40Gbps standard
11. Network cable sequence: T568B standard straight through
12. Shield type: SFTP
13. Material: PVC wire with high elasticity and environmental protection, 26AWG OFC non-oxygen copper conductor.
14. Widely used in computers, laptops, showers, switches, televisions, set-top boxes, cameras, network storage NAS, servers and other equipment

1. HDMI version 1.4 cable.
2. Backward compatible with all previous HDMI standards.
3. HDMI head: skidproof gold-plated plug head.
4. Wire: silver coated copper wire inside to reduce interference.
5. Cable cover: 4layers shielding, high-precision standard polyethylene insulating material.
6. Fully HDCP compliant to provide highest level of signal quality.
7. Supports uncompressed audio/video signals for HDTV, HDTV receiving box, playStation 3 and new version of XBOX360.
8. Supports multiple audio formats, from stereo to multi-channel sound.
9. Perfect for both high-definition video and standard video formats.
10. Shielded for maximum protection from RFI and EMI interference.
11. Support 720P and 1080P true HD resolution.

1. The item is a toslink male to toslink male audio fiber cable.
2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels.
3. Optical cables transfer the signal using light, thus completely eliminating any chance for RFI, EMI or ground loop interference.
4. Using good quality fiber core ensures high speed, high efficiency, high fidelity, and low loss of transmission.
5. OD 6.0mm woven nylon net + PVC jacket prevents cable from damage and adds flexibility and durability for years of listening pleasure.
6. Metal head strong and sturdy.
7. Non-slip metal grip connectors provide easy installation.
8. Dust cap protects connector from contamination when not in use.
9. This optical fiber cable widely used on CD / DVD / DAT / MD / TD and other digital equipment, and it provides you fully enriched and detailed sound quality.

1) High quality CAT6 cable

2) This cable connects all the hardware destinations on a Local Area Network

3) Ideal for use with 10 Base-T, 100 Base-T, 1000 Bast-T and 10000 Base-T networks.

4) Gold plated connectors

5) Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other Computer Networking applications.

6) Transmission rate: 10G Base-T, performance characterized to 500MHz

6) Connector: R-45 Male (8P8C) to RJ45 (8P8C)

7) Cable Length: 15m

1. Material: stainless steel + wood
2. Capacity: 15ml
3. Usage: measuring milk powder, flour, liquid, etc.
4. Wooden handle and stainless steel spoon, not easy to rust or corrode, durable
5. Easy to measure, the inner wall brushed processing, smooth and not easy to stick powder
6. Wooden handle, comfortable to hold, hanging hole design, easy to organize
7. One-piece design, smooth surface, easy to clean, beautiful and practical
8. Weight: about 30g
9. Size: about 11.5 x 3.5 x 1.5cm

1) Uses the high quality chrome vanadium steel overall precision forging, 72 tooth ratchet design

2) Surface mirror finish polishing, rust, beautiful

3) 15-degree angle offset, more convenient to operate, professional design and just 5-rotating nut

4) Suitable for use in small space and a long screw quick disassembly

5) Length: 19.5cm

6) Specifications: metric 15mm

1. Material: new material of handle ABS.
2. The clamping head screw hammer head is made of pure copper.
3. The rod can expand and expand in the handle.

1. Material: alloy
2. Treatment process: electroplating
3. Shape: water drop, hollow, diamond-studded
4. The quintessential punk accessory that can be worn to any gig
5. Made of lightweight, durable and comfortable to wear material
6. Suitable for Halloween decoration, secret room, haunted house, bar party and other performances, suitable for parties, punk style, gothic style
7. Application: This bracelet can be used for rave parties, hip-hop, hip-hop, cosplay and vocal concerts
8. Durable and comfortable to wear, with a vintage feel
9. Suitable for most people to show personal taste and punk style
10. Weight: about 23 grams
11. Specifications: 15 pieces/set

1. Input: 9V/2A
2. Mobile phone wireless charging: 5W-7.5W-10W-15W Max.
3. Earphone wireless charging: 5W Max.
4.Watch wireless charging: 2W Max.
5. Wireless charging conversion rate: 73%
6. Charging distance: ≤8mm
7. Size: 13.7x8.5x5cm

1. 10 large magnets, precisely matched with the machine, strong magnetic attraction, stable and does not fall off
2. Intelligent chip, multiple protections, safe charging, includes overcurrent protection / short circuit protection / overcharge protection / overtemperature protection / overcurrent protection / overdischarge protection / power protection / foreign object protection
3. Without removing the phone case, wireless charging range is 2mm - 6mm, charging with the case is just as fast
4. Can freely adjust the angle, ergonomic design, golden viewing angle, can charge while using the phone
5. Intelligent FOD metal foreign object detection protection, providing multiple guarantees
6. Supports simultaneous charging of multiple devices, independent charging: single bottom wireless charging 15W (Max), simultaneous wireless charging: magnetic wireless charging 10W (Max) + bottom wireless charging 10W (Max)
7. Can be used as a desktop stand, easily store the watch adapter
8. Charging indicator light design, can reflect the charging status
9. Anti-slip silicone pad, effectively prevents slipping

Parameters
1. Transmission distance: 2 - 6mm
2. Input voltage: 12V 2A / 9V 2.7A
3. Charging standard: compatible with Qi
4. Charging efficiency: greater than or equal to percent 73
5. Charging interface: Type-C
6. Independent charging: single bottom wireless charging 15W (Max)
7. Simultaneous wireless charging: magnetic wireless charging 10W (Max) + bottom wireless charging 10W (Max)
8. Materials: PC + silicone + magnet
9. Size: about 15 x 9 x 12cm

1. Dynamic color-changing lights keep you informed of charging status
2. Strong magnetic attraction enables charging even with cases on
3. Zinc alloy construction with built-in chip for smart device recognition, multiple protections, safe fast charging without damage, excellent heat dissipation for worry-free charging
4. Built-in strong magnetic positioning for precise charging
5. Three-stage foldable design for easy portability
6. Wireless charging for three devices simultaneously phone/watch/earbuds

Specifications
1. Input: 9V 4A
2. Output: 15W (Max)
3. Interface: Type-C
4. Induction distance: 2-10mm
5. Conversion efficiency: less than or equal to 72%
6. Cable length: 100cm
7. Material: ABS + silicone + zinc alloy
8. Folded size: about 8 x 8 x 2.8cm

1. Built-in 80cm concealed retractable cable, can be extended and retracted at will, and quickly stored
2. Built-in strong magnetic positioning adsorption, precise charging
3. Supports 15W wireless fast charging, allowing simultaneous wireless charging of three devices, improving efficiency
4. Adjustable in multiple angles up and down, convenient for charging
5. Integrated folding storage, convenient for carrying around
6. 3 independent status indicator lights, clear indication of charging status
7. Strong magnetic force, can charge even with the phone case on

Parameters
1. Input: 9V 3A
2. Output: mobile phone: 15W/10W/7.5W; headphones: 5W; watch: 2.5W
3. Interface type: Type-C
4. Inductive distance: 2-6mm
5. Conversion efficiency: less than or equal to 72%
6. Extension line length: 80cm
7. Material: ABS + PC + zinc alloy
8. Foldable size: about 7 x 7 x 4.1cm

Notes:
1. There are MOS and other components on the board, which are easily damaged by soldering iron induction electricity or static electricity. Please make sure that the soldering iron used is grounded (and the ground wire of the power strip is connected). It is best to wear anti-static gloves when operating.
2. Be careful not to install the battery upside down, otherwise the board may burn.
3. Please choose a power supply with sufficient power. Only in this way can the board work properly.
4. The board power supply should not be higher than 5V.
5. Please do not modify the board without technical confirmation.
6. It is normal for the module to heat up when working at high power, just pay attention to fanning.

Product Introduction:
1. This product is suitable for power-off equipment without power outages. When there is power, use external power supply, and automatically switch to battery power supply seamlessly when there is a power outage.
2. If the USB interface is used for power supply, it is recommended to use the Type-c interface. Compared with the microUSB interface, the current that can pass is much larger, and the maximum current that can pass is 5A.
3. Suitable for routers, cameras, development boards and other devices, seamlessly switch to battery power when power is off, and keep the network connected when power is off.
4. Seamless switching between external power supply and battery dual power supply (no delay)
5. Uninterrupted power supply, automatic start when power is off, automatic charging when incoming call.
6. Output voltage 5V/9V/12V optional, other voltages can be customized.
7. Four practical functions: lithium battery charging, lithium battery protection, boost output, and UPS switching.
8. Two-color LED indicates charging status, the green light is always on when full, and charging stops automatically.
9. Type-C interface, large current.
10. Product size: 89 x 42mm
11. Weight: about 37g

Function description:
1. UPS function: When the power supply is powered, the power supply directly supplies power to the load through the boost circuit, and charges the lithium battery at the same time. Once the power supply is off, the battery path is automatically started to supply power to the load through the boost circuit.
2. Boost circuit: peak power up to 20W, rated power up to 15W, BOST boost circuit, built-in 12A high current MOS, efficiency up to 96%, module static power consumption 25mA, optional 5V/9V/12V output.
(Load normal recommendation <15W. Output 5V: current 3A, output 9V: current 1.6A, output 12V: current 1.2A)
3. Lithium battery protection overcharge, over discharge, over temperature, over current protection (if short-circuited by mistake, it will enter the protection state and no output, and it will automatically activate and restore output when connected to 5V charging)

1. Material: aluminum alloy + PC mirror material
2. Transmission distance: less than or equal to 8MM
3. Wireless charging standard: QI
4. Input interface: Android, Type-C
5. Input voltage/current: 12V/2A 9V/2A 5V/2A
6. Output power: 5W / 7.5W / 10W / 15W max
7. Working frequency: 110-205KHz
8. Product size: 100mm x 6MM

1. Input parameters: DC9V/4A
2. Output power: Magnetic charging 25W, compatible with 15W/10W/7.5W/5W
Earphones: 3W
Watches: 3W
3. Conversion efficiency: Greater than 73%
4. Transmission distance: Charging distance <= 8mm
5. Product dimensions: 57 x 8.4 mm

Features
1. Thicken the copper core wire to increase the charging speed.
2. Adaptive smart chip. Full of automatic protection mobile phone, to prevent overvoltage and overcurrent, safety protection does not hurt the equipment.
3. Magnetic suction head, free of plugging and unplugging, prolongs the life of the interface.
4. Nylon weaving, not easy to break, no knots, no deformation.
5. Strong magnetic adsorption, not afraid of shaking.

Specification
1. Material: aluminum alloy/TPE/nylon braided
2. Power: 15W
3. Input interface: Type-C
4. Output interface: Micro USB
5. Transmission rate: 480Mbps
6. Cable length: 1m

1) 15X handheld exclamation mark type magnifier

2) With high brightness, two LED lamps can make the magnifier clearer

3) Adopt handhold handle to conform to ergonomics design, ensure softer and more comfortable hand feeling

4) With arc shaped switch pushing board to conforms to finger shape

5) Apply to offices, hospitals, schools, instrument evaluation, printing, home living use

6) Diameter: 37mm

7) Powered by 3 x AAA batteries (Batteries not included)

8) Size: 130mm x 45mm x 22mm

9) Package Contents:

- 1 x Magnifier

- 1 x User Manual

1. 採用優質材料製成，耐用。
2. 高透光率，讓您在水下拍攝時捕捉更清晰、更明亮的畫面
3. 15X 微距鏡頭，提升物體放大倍率，更適合拍攝植物、花卉或小昆蟲
4. 緊湊、輕巧且便攜的配件，適合運動相機愛好者
5. 適用於 GoPro HERO10 Black / HERO9 Black