About the product
1. Aluminum-magnesium alloy material, high quality, durable and lightweight
2. 180 degrees folding pipe, easy to carry and store
3. Spring hook for hanging things to increase stability
4. 4 section legs for height adjustment
5. Quick release plate with safety lock to prevent device from accidentally fall and anti-spin block to keep camera steady
6. The ball head supports 360 degree rotation for different shooting angle
7. Rubber feet to prevent sliping
8. Twist locking design, easy to lock and stay steady
9. Can assemble into monopod

Package includes
Tripod with ball head and quick release plate
Protective bags
Accessories
Multifunctional strap

Features
1. Made of high-quality aluminum alloy, strong and lightweight
2. Easy installment, sets of leg protection also have anti-skid function
3. External pull-style angle adjustment device to adjust leg opening angle
4. Turn the bearing plate clockwise to lock, turn counterclockwise to unlock, prevent your camera from accidentally fall
5. Positioning grooves in the shaft to prevent rotation offset

About the product
1. 3 groups (means that you can control up to 3 flashes that has YN622C attached).
2. Mix TTL, remote manual, and super sync groups
3. Individual 1/3rd stop manual power and FEC adjustment
4. Remote flash zoom in 3 groups, and auto zoom
5. 2nd curtain sync, HSS, super sync
6. USB port for firmware updates
7. AF assist light
8. Remote shutter release function (there is two cables to connect the unit to your camera)
9. Dedicated buttons for fast adjustments
10. Battery level indicator
11. PC sync port
12. 7 channels
13. Improved stability and transmission speed
14. Super sync manual timing adjustment by group (for supporting some studio flashes).
15. Flash value lock function (FVL)
16. Modeling flash & red-eye reduction flash
17. Settings saved automatically
18. PC port input
19. Up to 100m range
20. Basic trigger mode for non Canon cameras (with standard hotshoe, max sync speed is 1/250s)

About the product
1. Support Wireless Master Function
- The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.
2. Support Wireless Slave Function, fully support YN560-TX, RF-603(I/II), RF-602 wireless transmitter
- One YN560 IV can respectively receive the wireless signal from YN560 IV / YN560-TX / RF-603 (I/II) / RF-602, with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.
3. Multiple Trigger Synchronous Mode Supported
- The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.
4. Settings Save Automatically, Support Custom Settings (Fn)
- The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.
5. GN58 @ ISO100, 105mm
- High Guide Number 2.4G wireless speedlight support M/Multi mode.
6. Sound Prompting System
- When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.
7. Support Electric Zooming Function
- The flash coverage can be altered between 24-105mm through the [ZOOM] button.
8. Ultrafast Charging Recycle System, Support External Power Supply
9. Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface
10. Suitable for:
Any Standard Hot Shoe DSLR Camera, such as Canon, Nikon, Pentax, Olympus, and so on.

Features
1. International standard 1/4 camera screw, compatible with most SLR camera/DVR
2. Built-in lens bracket support,effective support for lens and protect cameras.
3. The distance between the camera and lens bracket connection can be adjusted up and down,before and back.
4.Can be used on a tripod, bracket,matte box, as well as follow focus and various combinations of DIY.
5. High strength aluminum alloy production technology, strong and durable.
6. Adopt international standard 15 mm tube, double tube is more stable, standard thread, can be unlimited extension.
7. Each part can be easily uninstall and restructuring.

Features
1. International standard 1/4 camera screw,compatible with most SLR camera/DVR
2. Built-in lens bracket support,effective support for lens and protect cameras.
3. The distance between the camera and lens bracket connection can be adjusted up and down,before and back.
4. Can be used on a tripod, bracket,matte box, as well as follow focus and various combinations of DIY.
5. High strength aluminum alloy production technology, strong and durable.
6. Adopt international standard 15 mm tube, double tube is more stable, standard thread, can be unlimited extension.
7. Each part can be easily uninstall and restructuring.

Features
1. 100% Brand New and High Quality.
2. Offers ND2-ND400 neutral density.
3. Smooth rotating to desired density.
4. ND filters (Neutral Density) reduce the amount of light reaching the film without affecting the color. Can be used to enable slower shutter speeds. Also can be used to better separate subjects from the background by allowing wider apertures, effectively decreasing depth of field. Great for portraiture and outdoor scenes.
5. Slim profile design. Thin filters are essential for avoiding vignetting when shooting at wider angles.
6. This filter is mounted on a rotating frame allowing the user to determine the desired amount of light transmittance by rotating the filter.
7. These filters are double threaded allowing additional filters to be mounted one over the other.
8.Use one at all times to protect your delicate lens from dirt, scratches and accidental damage. Better to scratch or break a filter than an expensive lens
9. Large aperture is available to creat depth of field easily.
10. Suitable for dynamic screen, waterfalls, streams, waves, etc.
11. Filters Frame is made of aluminum metal. Multicoated lens for reduced lens flare and ghosting caused by reflections.

About UV Filter
1. High quality optical glass for maximum clarity and vivid picture
2. The UV lens filter served as permanent lens protection against dust, dirt and stain
3. These digital cameras filters are suitable for all DSLR lenses, digital still, video & DVD camcorders
4. Camera lens filter absorbs ultraviolet rays without an increase in exposure to provide a clearer picture as well as protection for your valuable lens
5. Camera UV lens filter is used to alter the properties of light as the light enters the camera lens
6. Suitable for Nikon AF-S DX 18-55mm/3.5-5.6G VR, Nikon AF-S DX VR 55-200mm/4.5-5.6G IF-ED, Nikon AF 24mm/2.8D, Nikon AF 28mm/2.8D, Nikon AF 50mm/1.4D, Nikon AF 50mm/1.8D, Nikon AF-S DX 35mm/1.8G, Nikon AF 35mm/2D, Nikon AF-S DX 40mm/2.8G Micro, Nikon AF-S DX 85mm/3.5G ED VR Micro, Pentax 18-55mm F3.5-5.6 AL II, Canon EF 50mm f/1.8 II, etc.

Main Features
1. 3-way head
2. Built-in spirit level for perfect alignment
3. 4-section legs with quick lever locks
4. This tripod's leg was manufactured of aluminum, so this tripod is light and strong
5. This tripod's foot was used rubber for non slip

1) Compatibility: Digital Camera

2) Type: Holder

3) Weight: 0.55kg

4) Material: Aluminium

5) Product Features: practical, simple, light weight, easy to carry

6) Packing List: 1 x Camera car

1) Material: Plastic + magnalium alloy

2) Compatible Camera Model: Suitable for SLR cameras and camcorders

3) Useful, simple and lightweight

4) Easy to install and unload

5) Keeps the screen steady when shooting

6) Adjustable wheels

7) Could move in a straight line and maximum 45 degrees turn

8) Packing list: 1 x Dolly

1. Material: Aluminum alloy + plastic
2. Socket Size: 1/4 inch
3. Load: 3 kg
4. Height: 11cm
5. Low Height: 11cm
6. Compatible for monopod with 1/4 inch screw
7. Packing List: 1 x Tripod support base

Features
1. This mini desktop camera slider car will be very helpful when you want to take photos from different angle by moving your camera
2. Main body is made of metal, sturdy enough to carry you DV and DSLR cameras.
3. Precision extruded industrial grade aluminum construction.
4. High quality durable and sealed bearings on both sides of each wheel.
5.Lightweight and durable construction.

Specifications
1. Material: Plastic + Aluminum
2. Compatible Camera Model: Universal
3. Socket size: 1/4 inch
4. Functions: This dolly car can help you create more dynamic tabletop shots
5. Features: Features 3 x 1/4 screw positions for mounting an optional ball head or articulating arm etc.; Constructed of aluminum with roller-blade style wheels and steel ball-bearings; Front and rear wheels adjust to allow straight or circular movements and glides
6. Size: 20 x 13.5 x 6.5cm

1. With 1/4 inch screw on top. Easily mounted to any dslr camera, LED video light, action camera, smart phones and more!
2. Compatible with any devices with 1/4 inch thread hole, such as add to a ball head mount to achieve 360 degree rotation, tripod mount, smartphone mount, and so on.
3. Superb metal construction body with durable diamond pattern on surface.
4. Anti-slip and ergonomic design, very comfortable to use.
5. This listing is for the handle grip only.

1. Flexible joints, can rotate 360 to form the ideal shape
2. The link attachment locks your camera on the tripod enable it very safe
3. Your camera can be used anywhere with this tripod
4. Support mini digital camera
5. Intended for: Tripod mountable cameras and professional tripod heads
6. Size: 170x35x32mm

1. Complete flexibility, made of plastic
2. Portable with light weight
3. Fixed it at anywhere you like
4. Solid stable construction, will not wobble
5. 1/4-inch -20 screw digital camera link attachment
6. Each leg has nine black ball and socket joints that each have 360 rotational range
7. The link attachment screws into most digital camera sizes and is removable
8. Allowing it to level out a camera on the most uneven surfaces

1. For macro shooting, or shooting film negatives
2. Locking knob and sliding the side knob
3. Lateral scale, moving more accurate
4. Activities Scope: 16cm
5. Bottom there is alveolar, fine sliding accurate positioning; the bottom of the standard 1 / 4 screw holes, can be directly screwed to a tripod, head to use
6. Size: 16cm x 9.5cm x 1.5cm
7. Material: Metal

1) 1/4 to 3/8 Stainless Steel Screw for Tripod Heads

2) Material: Stainless Steel

3) Length: 20mm

4) Weight: 12g

1. Good quality and extremely durable PU material.
2. Compact, lightweight and extremely durable design.
3. Protect your digital camera from dust, finger prints, and scratches.
4. Internal soft design gives you a soft and comfortable touch.
5. Additional adjustable long strap clasps onto the sides, makes it convenient to carry.